1. Dismantle
2. Place the board to naviplus adaptor and write fresh and working serial number, bluetooth and wifi
3. Assemble.
4. Activate via wifi.
5. Smile.
For PAID FRESH SERIAL JUST CONTACT ME
Saturday, November 17, 2018
How To Remove iCloud Account On iPad 2 WiFi
Step by step procedures on how to remove icloud account on iPad2 WiFi using Naviplus Pro3000S
1. Dismantle
2. Place the board to naviplus adaptor and write fresh and working serial number, bluetooth and wifi
3. Assemble.
4. Activate via wifi.
5. Smile.
1. Dismantle
2. Place the board to naviplus adaptor and write fresh and working serial number, bluetooth and wifi
3. Assemble.
4. Activate via wifi.
5. Smile.
How To Remove Icloud Account On iPad 2 GSM
This is a tutorial on how to remove your icloud account on iPad 2 GSM. You should know that in removing icloud account, this iPad2 GSM will be converted to iPad 2 WIFI.
Step by step procedure:
1. Dismantle
2. Carefully remove the resistor R1205.
3. Assemble.
4. Restore to iPad 2 wifi, iPad2,1_9.3.5_13G36_Restore via 3utools or iTunes.
Step by step procedure:
1. Dismantle
2. Carefully remove the resistor R1205.
3. Assemble.
4. Restore to iPad 2 wifi, iPad2,1_9.3.5_13G36_Restore via 3utools or iTunes.
Monday, November 12, 2018
ASUS X453SA No Display [FIXED]
I receive this ASUS X453SA with no display after powering on. I decided to program first its bios. After reprogram the display screen blinks. I dismantle the LCD and check its circuit. I found 2 open fuse. Problem solved after replacing two fuses.
Wednesday, November 7, 2018
How To Fix HP Laptop With No LCD Light
When power on theres no lcd light. If this is the case I always check the lcd flex pins. As expected, the lcd flex was slightly detached or disaligned from lcd pins. See image below.
What I did was to re-attach it.
Problem solve!
What I did was to re-attach it.
Problem solve!
Tuesday, November 6, 2018
ACER E5-411 No Power [FIXED]
Laptop ACER E5-41 comes with no power. I checked if shorted to ground on battery terminal and charging terminal, and it was really shorted. Full shorted. I first download its schematic and analyze the circuit. I removed PQ24 and check if the board was still shorted to ground. Stiil yes. Until I realize that the charging ic OZ8691LN is shorted. I removed it. The short was gone. I replace the charging ic with a good ic, but symptoms persist. Im sure that charging ic that i put in was good, so I decided to look for another defective parts. I found out that PU5, the 3.3valw ic was heating up. When i remove it, the short was gun. Finally I replace the ic and the laptop works perfect.
