The only solution for this blinking display if the LCD panel is good is to flash the BIOS. I used EZP2010 V3.0 Bios Programmer.
Trending Hot Topics
Featured Posts
Interesting Topics
Popular Posts
-
I receive this ASUS X453SA with no display after powering on. I decided to program first its bios. After reprogram the display screen blink...
-
After removing the damage charging port pin2 and pin4 lifted, in other words it was opened circuit. If this pin2 and pin4 is open, you will...
-
I successfuly repaired this Lenovo Ideapad 320 laptop with board id NM-B242 Rev 1.0 . According to customer, they used universal charger an...
-
Here is an iPhone 5s schematic diagram(iPhone 5S 820-3292-A) downloaded from other sites, and reuploaded b me on my mediafire account. The s...
-
The customer said that this laptop was from US, and upon receiving the unit they complained that there was no display. In my thought, maybe ...
-
Samsung S7392 that has a shorted board due to overcharging. The method I used is not very common. When you connect 1.3 voltage you must ex...
-
Due to water damage, this Samsung C3303 failed to power on. The most common issue is an open pattern. All you need to do is to check the lin...
-
Most common issue to almost all samsung units when it comes to not charging problem is no other that the charging port. replacing the charg...
Blog Archive
- November (1)
- October (1)
- September (1)
- August (4)
- November (1)
- October (7)
- July (4)
- April (2)
- December (1)
- November (5)
- August (11)
- May (1)
- April (1)
- February (1)
- October (4)
- September (7)
- August (3)
- July (5)
- April (1)
- March (1)
- January (3)
- December (1)
- October (3)
- September (13)
- May (2)
- January (3)
- July (1)
- May (2)
Powered by Helplogger



0 comments:
Post a Comment