Followers
Friday, October 16, 2020
Wednesday, September 23, 2020
ASUS K550L Tested Bin File
I successfully repaired ASUS K550L Series CORE i7 powering on without display with this tested bin file.
MotherBoard ID: X550LD REV2.0
DOWNLOAD X550LD REV2.0 BIOS BIN
Comment below if tested with you.
Thursday, August 20, 2020
Acer ES1-431 No Power Successfully Revived
I have here laptop Acer ES1-431 with board id: DAZ8ADMB6D0 REV:D diagnosed as dead-short. First thing first, I carefully and slowly check all component via microscope, and I found suspected capacitor. I removed it and luckily it was the one that is shorted. I test the mother board, and the unit can able to power on but without display.
I successfully fixed the no display by flashing good bios bin file that you can download below.
Here's a video on youtube on how I successfully repaired this laptop.
I hope it helps.
Sunday, August 16, 2020
ACER ASPIRE ES1-432 Tested BIOS Bin
I personally tested this bios bin file on Acer Aspire ES1-432 with BOARD ID: DA0ZQFMB6F0 REV:F.
Toshiba Satellite C655D Bios Password Removal
This is the tested BIOS BIN if you encounter BIOS password on Toshiba Satellite C655D laptop. . Below are some of the laptop's board id pictures/images.
I used RT809F to flash the bios bin file.
IT REALLY WORKS!
Do not forget to back up your bin file before writing.
Thursday, November 14, 2019
iCloud Bypass with CHECKRA1N! (FULL TUTORIAL)
iCloud Bypass with CHECKRA1N! (FULL TUTORIAL)
The most powerful iCloud Bypass ever. Compatibility: iPhone 5s – iPhone X! Supported iOS: 12.3 to latest version!
All downloads: appletech752.com/downloads.html
Procedure:
- You must have installed iOS 12.3 or up
- Download and Run checkra1n on your device
- open two terminal tabs
- One: iproxy 2222 44 [device udid]
- Two: ssh root@localhost -p 2222
- mount -o rw,union,update /
- rm -rf /Applications/Setup.app
- uicache -a
- killall backboardd
- Done
- Turn off the device.
- Put it to DFU again.
- Open checkra1n app and click start and wait for the device to boot.
- When booting wait for blackscreen.
- SSH again to iPhone.
- uicache -a (to reset device cache)
- killall backboardd (to reset lockdownd)
- killall -9 SpringBoard (to safely respring device)
- Done! You should be on homescreen
Icloud bypass limitations?
- No carrier
- Not possible add new icloud id
- No Sim Card connection
- Not possible Making phone calls
- Receive SMS No
- No Use 4G/3G internet
- No Facetime
- No iMessage
- No iTunes
- No Sync apple watch
- not possible install new profiles
- not activated
- no apple services
credits to Apple Tech 752
Saturday, October 26, 2019
iPad 3 GSM iCloud Removal
1. Dismantle the unit.
2. Carefully remove the resistor as show on the image below.
3. Assemble the unit, and expect that the unit will be in DFU mode.
4. Simple flash it to iPad 3 Wifi. I use 3UTools software.
Now its done.
Tuesday, October 15, 2019
Saturday, October 12, 2019
Trending Hot Topics
Featured Posts
Interesting Topics
Popular Posts
-
This is an iPad Mini 1 VCC Main. If you have an iPad Mini 1 that has full shorted board to ground, these components will help you trace the ...
-
I have here laptop Acer ES1-431 with board id: DAZ8ADMB6D0 REV:D diagnosed as dead-short. First thing first, I carefully and slowly check ...
-
I personally tested this bios bin file on Acer Aspire ES1-432 with BOARD ID: DA0ZQFMB6F0 REV:F . DOWNLOAD DA0ZQFMB6F0 REV.F BIN
-
Samsung i9152 shorted board and it doesn't power on. Probably due to over charging. The solution is just remove the capacitor as shown o...
-
When I connect the charger the orange LED lights up, and when I press the power on, the yellow LED beside the switch blinks. And eventually ...
-
I successfully repaired ASUS K550L Series CORE i7 powering on without display with this tested bin file. MotherBoard ID: X550LD REV2.0 ...
-
Lenovo Ideapad 100 tested bios bin file. Board ID: NM-A681 REV:1.0 DOWNLOAD NM-A681 REV:1.0
-
This is an OPPO R831K water damage unit. I checked it and the board was shorted. It has many corroded parts. Just remove the capacitor C1838...
-
When I connect to 3.8V my digital power supply shut-off. Even on low voltage 1.3V it also shuts-off. This means that the J120H board is ful...
Blog Archive
- November (1)
- October (1)
- September (1)
- August (4)
- November (1)
- October (7)
- July (4)
- April (2)
- December (1)
- November (5)
- August (11)
- May (1)
- April (1)
- February (1)
- October (4)
- September (7)
- August (3)
- July (5)
- April (1)
- March (1)
- January (3)
- December (1)
- October (3)
- September (13)
- May (2)
- January (3)
- July (1)
- May (2)















