This is an O Plus Air board. You can see the charging port design. Very easy and safe to replace whenever your charging port has been damaged.
Friday, May 20, 2016
Saturday, May 14, 2016
Repairing MyPhone Infinity Not Charging
MyPhone Infinity's charging port was damage, and all the pattern in the board was all gone. The very first thing to do this is to find the charge positive line.
Below is the image of the positive line. Make a jumper on the charging port with respect to ground. The second image indicates that the positive line was correct, and it show success charging.
Finally re-assemble the unit and you're done
Popular Posts
-
This is an iPad Mini 1 VCC Main. If you have an iPad Mini 1 that has full shorted board to ground, these components will help you trace the ... -
I have here laptop Acer ES1-431 with board id: DAZ8ADMB6D0 REV:D diagnosed as dead-short. First thing first, I carefully and slowly check ... -
I personally tested this bios bin file on Acer Aspire ES1-432 with BOARD ID: DA0ZQFMB6F0 REV:F . DOWNLOAD DA0ZQFMB6F0 REV.F BIN -
Samsung i9152 shorted board and it doesn't power on. Probably due to over charging. The solution is just remove the capacitor as shown o... -
When I connect the charger the orange LED lights up, and when I press the power on, the yellow LED beside the switch blinks. And eventually ... -
I successfully repaired ASUS K550L Series CORE i7 powering on without display with this tested bin file. MotherBoard ID: X550LD REV2.0 ... -
Lenovo Ideapad 100 tested bios bin file. Board ID: NM-A681 REV:1.0 DOWNLOAD NM-A681 REV:1.0 -
This is an OPPO R831K water damage unit. I checked it and the board was shorted. It has many corroded parts. Just remove the capacitor C1838... -
When I connect to 3.8V my digital power supply shut-off. Even on low voltage 1.3V it also shuts-off. This means that the J120H board is ful...
