Thursday, August 20, 2020
Acer ES1-431 No Power Successfully Revived
5:50:00 PM
Acer, bios bin file, bios flashing, laptop, No Display, No Power, RT805F bios programmer, shorted
2 comments
I have here laptop Acer ES1-431 with board id: DAZ8ADMB6D0 REV:D diagnosed as dead-short. First thing first, I carefully and slowly check all component via microscope, and I found suspected capacitor. I removed it and luckily it was the one that is shorted. I test the mother board, and the unit can able to power on but without display.
I successfully fixed the no display by flashing good bios bin file that you can download below.
Here's a video on youtube on how I successfully repaired this laptop.
I hope it helps.
Sunday, August 16, 2020
ACER ASPIRE ES1-432 Tested BIOS Bin
I personally tested this bios bin file on Acer Aspire ES1-432 with BOARD ID: DA0ZQFMB6F0 REV:F.
Toshiba Satellite C655D Bios Password Removal
This is the tested BIOS BIN if you encounter BIOS password on Toshiba Satellite C655D laptop. . Below are some of the laptop's board id pictures/images.
I used RT809F to flash the bios bin file.
IT REALLY WORKS!
Do not forget to back up your bin file before writing.
Popular Posts
-
When I am repairing a unit with shorted board, I always connect it to power supply. There are 3 things I must check. (1) If it is full shor... -
I successfuly repaired this Lenovo Ideapad 320 laptop with board id NM-B242 Rev 1.0 . According to customer, they used universal charger an... -
MyPhone Infinity's charging port was damage, and all the pattern in the board was all gone. The very first thing to do this is to find ... -
I use my power bank to determine the shoretd capacitor. See video below. Just remove the burnt capacitor.
-
I have here Samsung J100ML/DS Shorted No Power. The solution may vary. Because we don't know what will be the faulty component/s. My me... -
I successfully repaired ASUS K550L Series CORE i7 powering on without display with this tested bin file. MotherBoard ID: X550LD REV2.0 ... -
I receive this ASUS X453SA with no display after powering on. I decided to program first its bios. After reprogram the display screen blink... -
After removing the damage charging port pin2 and pin4 lifted, in other words it was opened circuit. If this pin2 and pin4 is open, you will... -
When I opened the unit, I found out that the board was corroded due to liquid damage. The board was full shorted. My means of determining t...
