Basic Hardware Tips And Tricks

Followers

Monday, January 30, 2017

Thursday, December 8, 2016

Samsung S7392 Shorted Solution

Samsung S7392 that has a shorted board due to overcharging. The method I used is not very common. When you connect 1.3 voltage you must expect a capacitor heating up. But even 5 miinutes waiting, there's no capacitor that heats. So I decided to use my magic source, LOL! I used my power bank to supply a 3.8 voltage. I connect the negative terminal of my power bank to the negative battery terminal Samsung S7392. The I slowly tap the positive of my power bank to the positive terminal of the phone, and immediately one of the capacitor heats up.That's the deffective one :D I then remove the capacitor, and the shortage was gone. Hehe. Finally, jst replace it and you're done :) The cellphone was able to power on again, and back to normal.




Share:

Thursday, October 20, 2016

OPPO R831K Shorted No Power Part II

It's another shorted board OPPO R831K due to overcharging. And as I have said on my post, Samsung J100ML/DS Shorted No Power Solution that not all shorted have the same solution. Like my older post on OPPO R831K shorted

This time I use the method on how to solve Samsung J100ML/DS Shorted No Power. I also use my power bank and put lacquer flow on the board. As I've expected again, I did determine the faulty component 'coz the faulty component has been boiled/burst out. Or should I say, melt? Whatever!

Just see images below. Replace it and problem solve!






Share:

Samsung J100ML/DS Shorted No Power Solution

I have here Samsung J100ML/DS Shorted No Power. The solution may vary. Because we don't know what will be the faulty component/s. My method on how to solve this Samsung J100ML/DS Shorted No Power is by using my power bank. I connect the negative terminal of my power bamk to the negative terminal of the unit. Then I put some lacquer flow on the Samsung J100ML/DS board. Then eventually I tap the positive terminal of my power bank to the positive of the board for 2 seconds. Then finally I got the faulty component. That is the capacitor as shown on the image below.




Share:

Monday, October 3, 2016

Wednesday, September 28, 2016

OPPO R831K Shorted Solution

This is an OPPO R831K water damage unit. I checked it and the board was shorted. It has many corroded parts. Just remove the capacitor C1838 that is connected in Vbat_PMU with respect to ground as shown on the image below.





remove C1838





After removing the capacitor, the shorted was gone and the unit can now power on.



Share:

Tuesday, September 20, 2016

Trending Hot Topics

Featured Posts

Interesting Topics

Popular Posts

Blog Archive

Follow Us