Basic Hardware Tips And Tricks

Followers

Thursday, November 14, 2019

iCloud Bypass with CHECKRA1N! (FULL TUTORIAL)

iCloud Bypass with CHECKRA1N! (FULL TUTORIAL)

 

The most powerful iCloud Bypass ever. Compatibility: iPhone 5s – iPhone X! Supported iOS: 12.3 to latest version!
All downloads: appletech752.com/downloads.html
Procedure:
  • You must have installed iOS 12.3 or up
  • Download and Run checkra1n on your device
  • open two terminal tabs
  • One: iproxy 2222 44 [device udid]
  • Two: ssh root@localhost -p 2222
  • mount -o rw,union,update /
  • rm -rf /Applications/Setup.app
  • uicache -a
  • killall backboardd
  • Done
IF NOT WORKING TRY NEXT STEPS:
  • Turn off the device.
  • Put it to DFU again.
  • Open checkra1n app and click start and wait for the device to boot.
  • When booting wait for blackscreen.
  • SSH again to iPhone.
  • uicache -a (to reset device cache)
  • killall backboardd (to reset lockdownd)
  • killall -9 SpringBoard (to safely respring device)
  • Done! You should be on homescreen

 

 

Icloud bypass limitations?
  • No carrier
  • Not possible add new icloud id
  • No Sim Card connection
  • Not possible Making phone calls
  • Receive SMS No
  • No Use 4G/3G internet
  • No Facetime
  • No iMessage
  • No iTunes
  • No Sync apple watch
  • not possible install new profiles
  • not activated
  • no apple services

credits to Apple Tech 752

 

 

Share:

Saturday, October 26, 2019

iPad 3 GSM iCloud Removal

Here are the basic steps on how to bypas icloud on iPad 3 GSM. After removing or bypassing, the iPad 3 GSM will turn to iPad 3 WiFi.

1. Dismantle the unit.

2. Carefully remove the resistor as show on the image below.


3. Assemble the unit, and expect that the unit will be in DFU mode.

4. Simple flash it to iPad 3 Wifi. I use 3UTools software.







Now its done.

Share:

Tuesday, October 15, 2019

Saturday, October 12, 2019

Friday, October 11, 2019

Tuesday, July 23, 2019

Lenovo Ideapad 320 No Power Successfully Revived

I successfuly repaired this Lenovo Ideapad 320 laptop with board id NM-B242 Rev 1.0. According to customer, they used universal charger and set to 24V causing the laptop not to power on because of overvoltage.

I check for shortage using power supply but it has zero ampere. I dismantled the unit and check if there was a burnt components, but the board was clean and shinny.

I check 19V rail. I measure voltage input of the first mosfet, it has 19V. But on the output side, it has zero volt. I thought the culprit was the 2nd mosfet. But before I checked the 2nd mosfet, i disconnected the jumper PJ301. Then measured the output of the second mosfet if it has 19V. YES, it has! Therefore the problem lies on 19V rail.



So, I downloaded the schematics, and check the 19V rail. By analysing the schematic diagram under page 53, I planned to lift PQ314 hoping that this mosfet was leaking. I lifted the mosfet, then checked 19V at current resistor PR301. Huwaw!!! 19V was there! I quickly replaced PQ301 N-Channel type mosfet. Now the laptop has been revived.






DOWNLOAD
Share:

Saturday, July 20, 2019

How To Remove Icloud Account On iPad 3 GSM




Removing the icloud on iPad 3 GSM will disable the GSM feature. Instead, it will use as iPad wifi only. The instructions are very simple. Dismantle the iPad and remove the resistor as shown on the picture below.




After removing, the iPad must be in DFU mode. Flash it to iPad 3 wifi firmware via itunes or 3utools.
Finally, activate it and you're done.



Share:

Trending Hot Topics

Featured Posts

Interesting Topics

Popular Posts

Blog Archive

Follow Us