After replacing WiFi IC ( U5201_RF ), and still resulted in grayed WiFi, the other solution can be shown below. That is to replace " L5201_RF " at " C5201_RF ". This was a trick made by Makoto28. Again, thanks for sharing this solution sir Makoto28. I am your follower.
Followers
Monday, January 30, 2017
iPhone 6 Hang On Apple Logo Only Hardware Solution
When you connect it to iTunes, there's no response. This hardware solution was revealed by Makoto28. Credits to you again sir.
The soultion is to change the U2 IC ( U1700 or other called Tristar )
iPhone 6g Touch ID Sensor ( Fingerprint ) Not Working Solution
Here is a guide on how to repair iPhone 6 with touch id problem. This solution was made by Makoto28. Credits to him.
Trending Hot Topics
Featured Posts
Interesting Topics
Popular Posts
-
The image below is the J120H or often called as J1 2016 is the power switch ways. Just apply a jumper if the connection is open.
-
History: water damage First thing first, that is basic troubleshooting 1. Open the unit, check if grounded/shorted. Not shorted/groun...
-
After removing the damage charging port pin2 and pin4 lifted, in other words it was opened circuit. If this pin2 and pin4 is open, you will...
-
When you see an icon like headset appeared on the screen of your SKK T100, this is due to water damage. It means that the headset section wa...
-
TOSHIBASatellite C75-A-13N No Display fixed via bios flashing.
-
Samsung i9152 shorted board and it doesn't power on. Probably due to over charging. The solution is just remove the capacitor as shown o...
Blog Archive
- November (1)
- October (1)
- September (1)
- August (4)
- November (1)
- October (7)
- July (4)
- April (2)
- December (1)
- November (5)
- August (11)
- May (1)
- April (1)
- February (1)
- October (4)
- September (7)
- August (3)
- July (5)
- April (1)
- March (1)
- January (3)
- December (1)
- October (3)
- September (13)
- May (2)
- January (3)
- July (1)
- May (2)
Powered by Helplogger